Scrap Tipper

Nova Trailer offers a wide range of Scrap Tipper or known as according type tipper for its Worldwide customers. These type of Scrap Tipper can carry any kind of scrap, grain, wheat and can be reach to 70 Cbm capacity. We can produce these Scrap Tipper with Hardox HB450 wear plate, Domex or S355 JR mild steel material.

Scrap Tipper Highlights

  • Hydraulic: HYVA type Hidromas Lifting System
  • Body: 3-4-5-6 mm Hardox 450 or ST 6-8 mm according to load
  • Axles: BPW, SAF or Certificated Turkish Axles
  • Brakes: ABS, EBS or air brake system
  • Accessories: JOST or Turkish brand accessories
  • Suspension: Air and Mechanical or Bogie Suspension
  • Doors: Chain or Hydraulic System
  • Axle Lifting: Front Axle Optional
  • Rims: Steel or Aluminum Rims
  • Loading Volume: 30 – 70 cbm

Scrap Tipper Technical Details

Volume 30 to 70 m3
Base/Side Walls Imported wear sheet in hardness of 400-450 Brinell in sheet thickness of 4/3 mm – 8/6 mm.
Front Panel – Rear Cover Wear sheet in hardness of 400-450 Brinell. Rear cover can be manufactured to be hydrolic, mechanic, middle openable or side openable.
Crosses and Other All sheets are minimum ST52 A 1 quality Erdemir steel.
Side Barrier Optionally, it is applied to prevent the materials carried like excavations, rocks, scraps from damaging the lower accessories by falling down.

Hydraulic:  Tipper movement is provided by  level 5 or 6 heavy duty telescopic cylinder brand certificated Hidromas or Nova Brand Turkish origin which provides 45 degree tilt angle. Oil tank will be added to trailer, hydraulic contact between trailer and conveyor, is provided by 2 sockets

Chassis: Strengthened “I” section centre members are welded automatically by submerged welding machine. They are welded between 12 to 20 mm bottom or top steel plate and 5 to 10 mm hub plate.

These racks are supported against being twisted with each other by binding them with axle beams

Axles:  Turkish Brand, BPW or SAF 3 x 9,12,14,16 Ton axles brake drum or disc

There are brake shoes and heavy brake levers suitable for TSE norms

air-suspension-axle-setmechanical-suspension-axle-setbogie-suspension-axle-set

Suspensions ; It is supplied with Turkish brand of 6 pcs of air cushion with Z leaf spring or mechanical leaf spring suspension with 12 mm x12 pcs of layer with 100 mm width

Brake System ; Wabco, Haldex, Knorr brand ABS or EBS braking system will be used.

Brake Chambers ; 1 Axles with T 30/30 emergency brake chamber,2 axles with T 30 service brake chambers

Electrical system ; Hella, Aspöck, Sa-Ba or Sertplas 2×7 pin sockets – 24V, lights accord to standard in SAE rear stop lamps, side marker lamps, brake safety warning lamps and signal light fitted at the rear

2 tail & stop combined lamps (red)

2 turn signal combined lamps (orange)

1 license lamp (white)

Tires; 385/65 R22,5 or 12 R22,5 or 13 R22,5 or 315/80 R22,5 Bridgestone, Pirelli, Goodyear, Kelly, Sava

Rims; 11.75 R22.5 Jantsa-Jantas Brand

King Pin ; Jost  or equivelent Turkish brand DIN 74080 standards 2’’ or 3,5’’ king pin detachable from below made by SAE standards 8 bolt type. With E certificate.

Landing Gear ; Jost  or equivelent Turkish brand front Jack feet are telescopic,parallel working,double speed jointed with wide shoes static 50 tons, dynamic 25 tons capacity

Painting ; Before the painting, all surface is sand blasted

After sand blasting small parts are cleaned carefully

Epoxy gray is used for first protecting.

2-3 Times of high quality paints are applied on trailer

Thickness of painting checked by electronic devices

The color of trailer is selected by our customer according to RAL codes

Accossories;   Multi-piece plastic fenders that covers back axle shaft tires

1 plate tool box

Control Panel(Mob, air clock, access ramp lever)

Plastic water tank

Spare tire conveyor between trailer legs

Mounting and mounting space

Manuel or automatic controlled tent system