Low Loader

Nova Trailer is exports high quality, strong and competitive prices Low Loader which can carry combine harvester, dozer, excavators, and other heavy loads on it thanks to its forced steering axles and self steering axles. We pay attention to build strong Low Loader  for your safety. To check Nova Low Loader with different options please check below specifications.

Used for :
Combine harvester, Helicopter, Yacht, Excavator, Wheel Loader, Telehandler, Forklift, Mobile Crusher, Oil Drilling Machines, Drilling Machines, Transformer, Generator, and more…

Low Loader Highlights

Axles: BPW, SAF or Certificated Turkish AxlesChassis: ST Quality Steel useage
Steering: Self Steering or hydraulic steering axlesSuspension: Air or Mechanical Suspension
Loading Ramp: Hydraulic or Pnemautic RampBrakes: ABS and EBS brake system
Tires: Pirelli, Bridgestone, Goodyear brand tiresRims: Steel Rims
Accessories: JOST or Turkish brand parking leg and king pinLoading Capacity: 20 to 120 tons

Low Loader Technical Details


–  Low Loader rack is welded by submerged welding machine from 20 mm x 150 mm (ST 52.3 A Quality) bottom and top flat steel and 10 mm ST 52.3 hub plate. It has “I” section and also has 4 pieces


–  It is a pnemautic or hydraulic system. Ramp movement shall be provided by installation of a covered buton on to the tail part. Width of the ramp shall be 800 or 1000 mm according to lowbed


–  Top middle part of the platform shall be covered by 3/4 mm thick metal sheet pursuant to utiliziation. Rubber or Hardwoods shall be installed onto the sides of the platform ( points where the pallet or wheels are) to provide maximum friction.

  • AXLE

– Is manufactured in accordance with the European standards.It has a carrying capacity of 12 to 16 tons and donated Brake lining and bearing brand TIMKEN or FAG. Axle is certificated by ISO 9001 and 100.000 km warranty.
– 2 axles with the capacity 12-14-16 tons, are used
– Brand BPW, SAF, Turkish made
– There are brake shoes and heavy brake levers suitable for TSE norms


–  Dual circuit brake hardware, 24” Service brake bellows fitted to axle 3 24×30” Emergency
brake fitted to axle 1 and axle 2 Load balancing distribution valve, Automatic or manual brake adjusters
– WAbco ABS, EBS brakes


–  Parabolic double deck Z springs, Stowage springs, bogie suspension


– Hella, Aspöck, Sa-Ba or Sertplas brand 2×7 pin sockets – 24V, lights accord to standard in SAE rear stop lamps, side marker lamps, brake safety warning lamps and signal light fitted at the rear

2 tail & stop combined lamps (red)

2 turn signal combined lamps (orange)

1 license lamp (white)


–  Remote operated elevating system for front axle shaft in cabin


–  235/70 R 17.5
–  245/70 R 17.5
–  295/60 R 22.5
–  11 R 22.5
–  12 R 22.5
–  315/80 R 22.5


–  JOST or Turkish brand Steel king-pin which is 3,5” suitable for 6×4 tractor unit according to DIN 74080 standards and 3½” 42 CRMO4 according to DIN 74083 standards are used.
– King pin height will be arrange according to your tractor unit


–  JOST or Turkish brand two speed, telescopic, mechanical conveyor legs, with the capacity of 24 tons each


Before the painting trailer is sand blasted

ZincRich epoxy gray is used for first protecting.

1-2 Times of high quality paints are applied on trailer protects against humadity

The color of trailer is selected by our customer according to RAL codes


– Load lushing ring
– 1 x tool box
– 2 x Bike safety bar
– Plastic or Steel Mudguards
– Parking chock with handle Ladder
– Fire extinguisher closet and fire extinguisher tube


–  Lowbed platform can be pooled type to load high loads
–  Extra spare tire conveyor
–  Extra oil tank