Isolated Tanker Highligths

  • Without Heating System
  • Stone Wool Isolation
  • Pnemautic Discharging Valve
  • ABS and EBS brake system
  • JOST or Turkish brand parking leg and king pin
  • ST Quality Steel useage
  • BPW, SAF or Certificated Turkish Axles
  • Air and Mechanical Suspension
  • Steel or Aluminum Rims

Isolated Tanker

Nova can offer different type of trailers for carrying asphalt or bitum with its high quality Isolated Tankers. Isolated Tankers is a very good desing and can be reach to 50.000 Liter bitum carrying capacity. Nova Trailer can offer Isolated Tankers with heating system or without heating system for its valuable customers .

ISOLATED TANKER

CAPACITY
Volume: 25.000 ~ 50.000 lT

Number of Sections: 1-7 compartment

TANK FEATURES

Operating Temperature: -200C  +2500C

Cylindirical, elliptical or bottle type design,

For front and rear each, 1 external camber, groynesas

In tanker production sector, in the cylindirical body structure laterally jointless, monolithic sheets and at weld joints of these, unique body structure produced via longest weld seam technology, having least number of joints (T), safe, smooth straight surfaced

By using non-stop, high performance, robotic welding technology, weld defects caused by voltage generated on the body and human factor are minimized, and safety against impacts is ensured,

The slope in chassis design ensures complete discharging by not leaving any liquid in any section of tank,

Air gap safety against dilatations and outbursts,

ISOLATION

Tank body is covered with rock wool protecting product temperature and fluidity, accurately ensuring heat isolation,

Isolation matting which prevents prolapsing by peripherally wrapping the isolation applied to the body, providing protection against external factors, whose tightness of joints is ensured with lath and heat resistant rubber tire, is visually aesthetical, and front, rear isolation camber,

HEATING SYSTEM

At the inner bottom of tank, product fluidity is ensured with hot water or steam passing stainless pipes that are firm with operating temperature,

LOADING AND UNLOADING

Filling from top with DN 500 manhole lid with filling hole

In compliance with EN 14025, at the back of tank, laying from heat resistant manually switchable bottom valve to safety assuring 3 speed closing coupling, isolated, at a slope that won’t leave liquid after discharging, forced (free with flow) discharging via discharging line piping or air drive pressurized discharging with pneumatic working system

Drained drip pan collecting liquid streams generated after discharging at closing coupling discharge end

Chassis: Strengthened “I” section centre members are welded automatically by submerged welding machine. They are welded between 120/14 mm bottom or top steel plate and 5 mm hub plate.

Axles:  Turkish Brand, BPW or SAF 3 x 9,12,14,16 Ton axles brake drum or disc

There are brake shoes and heavy brake levers suitable for TSE norms

air-suspension-axle-setmechanical-suspension-axle-setbogie-suspension-axle-set

Suspensions ; It is supplied with Turkish brand of 6 pcs of air cushion with Z leaf spring or mechanical leaf spring suspension with 12 mm x12 pcs of layer with 100 mm width

Brake System ; Wabco brand ABS or EBS braking system will be used.

Brake Chambers ; 1 Axles with T 30/30 emergency brake chamber,2 axles with T 30 service brake chambers

Electrical system ; Hella, Aspöck, Sa-Ba or Sertplas brand 2×7 pin sockets – 24V, lights accord to standard in SAE rear stop lamps, side marker lamps, brake safety warning lamps and signal light fitted at the rear

2 tail & stop combined lamps (red)

2 turn signal combined lamps (orange)

1 license lamp (white)

Tires; 385/65 R22,5 or 12 R22,5 or 13 R22,5 or 315/80 R22,5 Bridgestone, Pirelli, Goodyear, Continental

Rims; 11.75 R22.5 Jantsa-Jantas Brand

King Pin ; Jost  or equivelent Turkish brand OMS DIN 74080 standards 2’’ or 3,5’’ king pin detachable from below made by SAE standards 8 bolt type. With E certificate.

Landing Gear ; Jost  or equivelent Turkish brand front Jack feet are telescopic,parallel working,double speed jointed with wide shoes static 50 tons, dynamic 25 tons capacity

Painting ; 

Before the painting trailer is sand blasted

ZincRich epoxy gray is used for first protecting.

1-2 Times of high quality paints are applied on trailer protects against humadity

The color of trailer is selected by our customer according to RAL codes